dualsense edge stick module replacement

New Era

2 min read

·

11-10-2024

63

0

Share

Replacing Your DualSense Edge Stick Module: A Comprehensive Guide

The DualSense Edge, Sony's premium PlayStation 5 controller, offers a range of customizable features, including adjustable stick tension. However, like any mechanical component, the stick modules can wear out over time, leading to drift or unresponsive input. If you're facing these issues, replacing the stick module is the solution. This guide will walk you through the process, using information sourced from GitHub, along with additional insights and tips.

Why Replace the Stick Module?

The stick modules are responsible for registering your thumbstick movements. When they wear out, you might encounter:

• Stick drift: The controller registers movement even when the stick isn't touched.
• Dead zones: The controller doesn't register input even when the stick is moved.
• Uneven response: The stick feels sluggish or unresponsive.

Tools and Parts You'll Need:

• Phillips #00 screwdriver: This is the essential tool for opening the controller.
• Spudger: This tool helps you pry open the controller safely and efficiently.
• Replacement stick module: You can find these online through various retailers. Ensure you get the correct model for your DualSense Edge (left or right).
• Optional: Anti-static wrist strap: This is optional but recommended for protecting sensitive electronics.

Step-by-Step Guide:

1. Power off your DualSense Edge and disconnect any cables. It's crucial to work with a completely powered-down controller to avoid damaging it.

2. Remove the back cover: Use a spudger to gently pry open the back cover, starting at the bottom. Work your way around the perimeter until the cover comes off.

3. Disconnect the battery connector: Locate the battery connector on the back of the controller. Use a spudger to gently lift the connector up and disconnect it.

4. Remove the old stick module: Identify the stick module you wish to replace (left or right). Use a spudger to carefully pry the module up and out of its housing.

5. Install the new stick module: Align the new module with the housing and gently press it down until it clicks into place.

6. Reconnect the battery connector: Carefully align the battery connector and press it down until it clicks into place.

7. Replace the back cover: Align the back cover with the controller and gently press it down until it clicks into place.

Additional Tips:

• Be patient and careful: Take your time and avoid using excessive force when opening the controller and replacing the module.
• Use a clean and dry workspace: This will help prevent any dust or debris from getting inside the controller.
• Test the new stick module: After reassembling the controller, test the newly installed module for proper functionality.

Where to Find More Information:

• GitHub: Many resources, including repair guides and part information, can be found on GitHub. Search for "DualSense Edge" to explore these resources.
• Online forums: Communities like Reddit and various gaming forums are great sources for tips and troubleshooting information.

Conclusion:

Replacing the stick module on your DualSense Edge is a relatively simple process. By following these steps and taking your time, you can restore your controller to its original functionality. If you're unsure or uncomfortable performing this procedure, consider seeking assistance from a professional repair service. With the right tools and resources, you can ensure your DualSense Edge remains a powerful and enjoyable gaming companion for years to come.